it and are not embossed or debossed, be careful not to scrub away the markings.Silicone Bracelet wear for a long time, of course, will not be as bright as custom logo keychainsnew, there will be dirty time, then, how should we clean and maintain the silicone wristbands? 1. Silicone hand rings are dirty. The most effective way is to rinse them with clean water. 2. The grease on the silica gel Bracelet should be coated with soapy water, wipe off the stain with a soft cloth, and then rinse off with clean water. Dry the water with napkins or soft cloth and blow it in a cool and ventilated place. 3. When encountering stubborn stains, they can be rubbed with cotton swabs dipped in alcohol. Above is the whole content of how to clean the silica gel bracelet. The author thinks that the first is maintenance, the second is cleaning, and the other is not to wash too frequently. You can also try using an eraser. Or clean with toothpaste. Look at your convenience with transparent adhesive or tape sticking. design-your-own-silicone-wristbandschristian-silicone-wristbands with the technology of overprint of tiny deviation. But the color logo will be easier fade away than the debossed inkfil one. Different logo can be printed by different method. The regular printing technology is silk print andcustom logo keychains Overprint. The ink is transferred to the substrate through the graphic part of the mesh via the extrusion of the scraper. The formation of the logo as the original text comes. That is the silk print. The advantage of silk print is that simple equipment, easy operation, easy printing platemaking, low cost and strong adaptability required. If the logo is of more that one color and the colors stand together , then the overprint works. In the printing and dyeing industry, several colors need to be printed on the product , that is so –called overprint. The overprint color sequence should be made according to the features of the inks and the Superimposition rule so as to make the color of the printing close to the original.